 |
- Chassisworks
- Anti-Roll Bars
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
Steering Columns - Race
Custom universal fit steering columns and components for race applications.
COLUMN-TUBE ADAPTER 3/4-36 SPLINE X .650 TUBE ID |
 |
 |
|
| Description: |
This splined tube adapter converts a 3/4 x .049 tube to 3/4"-36-spline for use with needle bearing U-joints. Machined male 3/4"-36 spline stud slips into the end of a 3/4 x .049 tube with .650 inside diameter. It is welded in place to match existing 3/4"-36 female spline U-joints. |
| SKU: |
6103 |
| Price: |
$19.00 |
|
 |
|
|
|
|
|
|
MALE COUPLER 9/16-26 SPLINE WITH 3/4" STEM |
|
 |
|
| Description: |
This coupler has a 9/16" -26 female spline, for Pinto/Mustang II manual racks on one side and fits a 3/4"-ID tube or 6101 U-joint on the other end. |
| SKU: |
6196 |
| Price: |
$20.00 |
|
|
|
|
|
|
MIL-SPEC U-JOINT, DUAL 3/4" BORES, 7/8" OD |
|
 |
|
| Description: |
This Mil-spec U-joint is an upgrade to the pin-and-block style, featuring less free play and a sealed design. Use it with coupler 6196 to attach directly to a Pinto rack. All vehicles over 2800 lbs. (drag or street) need needle-bearing U-joints. |
| SKU: |
6101 |
| Price: |
$84.00 |
|
|
|
|
|
|
SHAFT AUXILLARY BUSHING FOR 3/4" SHAFT |
|
 |
|
| Description: |
When you need to use three or more u-joints or dual style high misalignment u-joints in the steering shaft in order to clear headers, you will need this auxiliary bushing support to hold the center shaft in position. It fits the 3/4"-OD of the steering shaft and uses a flanged polymer bearing. |
| SKU: |
6160 |
| Price: |
$39.00 |
|
|
|
|
|
|
STAINLESS 2" COLUMN WITH 3/4" TUBE SHAFTS |
|
 |
|
| Description: |
Our all new quick-release, stainless-steel column is a lightweight, universal steering-column kit for skinny-tired drag-race and Outlaw cars weighing over 2800 lb. Overall 2" column length ships at 34" and can be easily trimmed to fit your particular application. To provide added installation flexibility our U-joints can be mis-aligned up to 42-degrees, and their narrow section width works very well in tight spaces. Thin-wall stainless-steel and 4130 tubing, lightweight aluminum U-joints (6 oz.), and polymer bearings keep the entire assembly under 9 lb. Billet upper-column mount and pivoting lower mount are also included. |
| SKU: |
6135 |
| Price: |
$439.00 |
|
|
|
|
|
|
STEERING COLUMN TUBES WITH NO U-JOINTS |
|
 |
|
| Description: |
Steering shafts and support tubes are 3/4", 4130 chromemoly tubes. A 1-1/8", 4130 column-mount tube features flanged polymer bearings to support the shaft. No u-joints or couplers are included. |
| SKU: |
6190 |
| Price: |
$89.00 |
|
|
|
|
|
|
STEERING-WHEEL FLANGE, ROUND, 3-HOLE |
|
 |
|
| Description: |
This flange is a round 1/8" inch thick flange with the three hole pattern for mounting the steering wheel. It is welded to the driver's end of the steering shaft. A quick release hub can be used as an alternative. |
| SKU: |
6117 |
| Price: |
$7.00 |
|
|
|
|
|
|
U-JOINT 9/16-26 X 3/4" BORE PIN & BLOCK |
|
 |
|
| Description: |
U-joints are for drag cars less than 2800 lbs. The 6198 is an economical pin-and-block design. It accepts 3/4" OD tubing into one side which is what we supply with our steering column kits. The u-joint can be bolted to the tube. The other side of this u-joint is 9/16 -26 spline. It is used to match the input shaft on the Pinto or Mustang II rack and pinion. |
| SKU: |
6198 |
| Price: |
$69.00 |
|
|
|
|
|
|
U-JOINT, DUAL 3/4" BORE, PIN & BLOCK |
|
 |
|
| Description: |
U-joints are for drag cars less than 2800 lbs. The 6197 is an economical pin-and-block design. It accepts 3/4" OD tubing into both sides which is what we supply with our steering column kits. The u-joint can be bolted to the tube. |
| SKU: |
6197 |
| Price: |
$59.00 |
|
|
|
|
|
|
 |
