 |
- Chassisworks
- Anti-Roll Bars
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
- Total Control Products
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
Pro Street 4-Link Frame Clips
Battle Cruiser 4x2"
PRO STREET BATTLE CRUISER 4-LINK REAR CLIP - 4x2" FRAME RAILS |
 |
 |
|
| Description: |
CLIP 4-LINK PRO-STREET BATTLE CRUISER 4x2" FRAME SYSTEM - CONTAINS 4x2" BOX-TUBE 4-LINK FRAME CLIP WITH PRO-STREET BATTLE CRUISER PARALLEL 4-LINK (POLY FRONT ROD ENDS) AND COIL-OVERS. OPTIONS FOR: LOCATER, SHOCKS, TUBS, SPRING RATES, FLOOR, AND ROLL CAGE. |
| SKU: |
783213 |
| Price: |
$1,319.00 |
|
 |
|
|
|
|
REAR FRAME (4X2") FOR BATTLE CRUISER OR PRO STREET 4-LINK |
|
 |
|
| Description: |
Made out of 2x4x.120" wall mild steel tubing. These mandrel bent frame rails have a lower rise over the axle making it easier to fit vehicles using a 29" tall tire. This is not our 7104 frame bent out of 2x4" material, it was redesigned for the smaller tire. The main crossmember uses the 1x2" oval loop increasing driveshaft and ground clearance. Our frame can be as narrow as 20" outside to outside width, allowing ample room for most tires. The 4-link is mounted under the frame rails, not on the inside like our competitors. This makes the suspension as wide as possible even with a narrow frame rail width, creating a better handling vehicle. Designed for our 4-link kit, (part nos. 6239, 6250, or 6251) and coil spring or coil over shocks. Kit includes a pair of frame rails; two 1x2" driveshaft loops; front crossmember tubing; upper shock mount crossmember; upper shock mount tabs; rear crossmember; hardware; instructions and drawing. Shipped unassembled by UPS. Factory welding and the 4"-ID exhaust ports are large enough for 3" exhaust are optionally available. |
| SKU: |
7152 |
| Price: |
$489.00 |
|
|
|
|
|
|
BATTLE CRUSIER PRO-STREET 4-LINK AND BRACKETS FOR 4X2" FRAME |
|
 |
|
| Description: |
Our popular Pro Street 4-link uses the same bracket geometry as our Battle Cruiser 4-link. Instead of spherical-bearing rod ends, it uses billet-steel rod ends with urethane bushing liners. In addition, one end of the link tube uses a urethane-lined weld eye, which virtually eliminates the possibility of the rod end rattling, causing the link bar to fall off. The bars are direct-thread, 1-1/4x.156" tube to accommodate the huge 1"-shank billet rod end. These rod ends are strong enough for blown street cars and offer plenty of flexibility for a street-driven vehicle. Pro Street 4-links are available with blue-powder coating or chrome-finish link bars. The 4-link front mount attaches under the 4x2" rear frame rail in our subframe. All hardware and billet rod ends are included. |
| SKU: |
6251 |
| Price: |
$449.00 |
|
|
|
|
|
|
FAB9 FORD 9" HOUSING (MILD STEEL) FOR PRO STREET 4-LINK |
|
 |
|
| Description: |
This welded FAB9™ mild steel rearend housing is available in lengths from 22" to 62-1/4" housing-end-to-housing-end in 1/4" increments. Pinion can be centered, 1/2" to passenger side or 1" to passenger side. You have a choice of 11 different housing combinations (see option list for details). The mild steel Pro Street 4-link brackets with 1/2" holes and 1 5/8" spacing between the brackets for the rod ends are welded at any outside-to-outside width from 16-1/2" to 42" in 1/2" increments. All welded housings will also include housing fill cap; magnetic drain plug with copper gasket; 12-point 3rd member studs; aircraft washers and locknuts. Shock mount brackets; tapered back braces (which add rigidity for high horse power applications) and housing vent are optionally available. A signed Custom Rearend Worksheet (which gives us all the information needed to build the housing) is required with all welded FAB9™ orders. You will find a link to the worksheet on the order page. |
| SKU: |
8255 |
| Price: |
$909.00 |
|
|
|
|
|
|
FAB9 FORD 9" HOUSING (4130) FOR PRO STREET 4-LINK |
|
 |
|
| Description: |
This welded FAB9™ 4130 rearend housing is available in lengths from 22" to 62-1/4" housing-end-to-housing-end in 1/4" increments. Pinion can be centered, 1/2" to passenger side or 1" to passenger side. You have a choice of 11 different housing combinations (see option list for details). The 4130 chrome moly Pro Street 4-link brackets with 1/2" holes and 1 5/8" spacing between the brackets for the rod ends are welded at any outside-to-outside width from 16-1/2" to 42" in 1/2" increments. All welded housings will also include housing fill cap; magnetic drain plug with copper gasket; 12-point 3rd member studs; aircraft washers and locknuts. Shock mount brackets; tapered back braces (which add rigidity for high horse power applications) and housing vent are optionally available. A signed Custom Rearend Worksheet (which gives us all the information needed to build the housing) is required with all welded FAB9™ orders. You will find a link to the worksheet on the order page. |
| SKU: |
8256 |
| Price: |
$1,159.00 |
|
|
|
|
|
|
REAR FLOOR KIT FOR BATTLE CRUISER 4-LINK - ALUMINUM |
|
 |
|
| Description: |
This complete kit is for use with any Chassisworks subframe or Eliminator I-series chassis. All panels are preformed and have square beads to match our wheel tubs. Each floor kit contains enough pieces to reinstall the complete floor, from the dropped crossmember to the rear bumper. Manufactured out of premium .040 aluminum with PVC sheet to protect the finish during installation. |
| SKU: |
6610 |
| Price: |
$299.00 |
|
|
|
|
|
|
REAR FLOOR KIT FOR BATTLE CRUSER 4-LINK - STEEL |
|
 |
|
| Description: |
This complete kit is for use with any Chassisworks subframe or Eliminator I-series chassis. All panels are preformed and have square beads to match our wheel tubs. Each floor kit contains enough pieces to reinstall the complete floor, from the dropped crossmember to the rear bumper. Manufactured out of 20-gauge steel for extra rigidity. |
| SKU: |
6612 |
| Price: |
$259.00 |
|
|
|
|
|
|
WHEEL TUBS 24x40" ALUMINUM |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 24x40" tubs fit all tires between 31" and 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Top quality .032"-thick aluminum material is covered with PVC sheet (easily removed after installation) to protect the finish against scratching. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6603 |
| Price: |
$179.00 |
|
|
|
|
|
|
WHEEL TUBS 24x40" STEEL |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 24x40" tubs are made of 22-gauge steel and fit tires between 31" and 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6602 |
| Price: |
$139.00 |
|
|
|
|
|
|
WHEEL TUBS 28x43" ALUMINUM |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 28x43" tubs fit all tires over 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Top quality .032"-thick aluminum material is covered with PVC sheet (easily removed after installation) to protect the finish against scratching. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6608 |
| Price: |
$210.00 |
|
|
|
|
|
|
WHEEL TUBS 28x43" STEEL |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 28x43" tubs are made of 22-gauge steel and fit tires over 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6614 |
| Price: |
$200.00 |
|
|
|
|
|
|
 |
