ADJUSTABLE UPPER MOUNTS FOR 1-5/8" FRAME (PAIR) |
 |
 |
|
| Description: |
Our adjustable upper shock mount welds to the frame and provides an offset double-shear mounting for the upper shock eye. The 6115 mount is cut to fit our 1-5/8" round frame rails. |
| SKU: |
6115 |
| Price: |
$59.00 |
|
 |
|
|
|
|
ADJUSTABLE UPPER MOUNTS FOR 3"X 2" FRAME (PAIR) |
|
 |
|
| Description: |
Our adjustable upper shock mount welds to the frame and provides an offset double-shear mounting for the upper shock eye. The 6114 mount is cut to fit our 3x2" frame rails. |
| SKU: |
6114 |
| Price: |
$59.00 |
|
|
|
|
|
|
Balljoints, Screw-In Style (pair) |
|
 |
|
| Description: |
Sold in pairs, these premium quality screw-in balljoints are compatible with Chassisworks upper and lower A-arms, and Total Control Product lower arms. |
| SKU: |
6104 |
| Price: |
$54.00 |
|
|
|
|
|
|
BILLET RACK CLAMP (POLISHED) |
|
 |
|
| Description: |
Machined from billet aluminum with a polished finish, our clamp replaces the factory rubber mount used on the passenger side of a '71-72 Pinto rack. |
| SKU: |
6124 |
| Price: |
$69.00 |
|
|
|
|
|
|
|
|
Disc Brake Kit (Front), Drag Race Meduim Duty for Chassisworks Fabricated Spindle (6166) |
|
 |
|
| Description: |
This bolt-on brake kit fits our Chassisworks fabricated drag race spindles. The 11-3/4" diameter .350" thick solid (or optionally available slotted) rotor with curved gas-reliefs, combined with the 4-piston Wilwood caliper will supply adequate brakes for vehicles up to 2900 pounds. If used with a parachute weight can be as high as 3100 pounds. The billet aluminum hub is drilled for 5 on 4-1/2" and 5 on 4-3/4" bolt circles. Complete with 1/2x3" 12-point studs and screw-on dust covers. Kit includes anodized aluminum billet hubs; rotors; 12-point wheel studs; 4-piston Wilwood forged calipers; brake pads; wheel bearings; seals; mounting hardware; instructions and drawing. Rotors with curved gas-relief slots are optionally available. |
| SKU: |
8336 |
| Price: |
$689.00 |
|
|
|
|
|
|
|
|
FABRICATED SPINDLES FOR LIGHT-DUTY BRAKES |
|
 |
|
| Description: |
Intended only for drag racing, our fabricated spindles are CNC-machined out of 4130 material and weigh less than six pounds. This is our direct replacement for the common (and outdated!) Pinto/Mustang II spindles, these new spindles have a black-powder-coat finish, 1/2"-20 thread in the steering arm, and feature relief-milled steering-arm and balljoint bosses to save weight. Use with our 8335 light-duty brake kit. |
| SKU: |
6164 |
| Price: |
$519.00 |
|
|
|
|
|
|
FABRICATED SPINDLES FOR MEDIUM-HEAVY DUTY BRAKES |
|
 |
|
| Description: |
Intended only for drag racing, our fabricated spindles are CNC-machined out of 4130 material and weigh less than six pounds. This is our direct replacement for the common (and outdated!) Pinto/Mustang II spindles, these new spindles have a black-powder-coat finish, 1/2"-20 thread in the steering arm, and feature relief-milled steering-arm and balljoint bosses to save weight. Use with our 8336 medium-duty and 8337 heavy-duty brake kits. |
| SKU: |
6165 |
| Price: |
$519.00 |
|
|
|
|
|
|
|
|
L/D BRAKES, CAC FABRICATED SPINDLE |
|
 |
|
| Description: |
This bolt-on brake kit fits our Chassisworks fabricated drag race spindles. The 10" diameter .350" thick solid (or optionally available slotted) rotor with curved gas-reliefs, combined with the 2-piston Wilwood calipers will supply adequate brakes for vehicles under 2400 pounds. If used with a parachute weight can be as high as 2900 pounds. The billet aluminum hub is drilled for 5 on 4-1/2" and 5 on 4-3/4" bolt circles. Complete with 1/2x3" 12-point studs and screw-on dust covers. Kit includes anodized aluminum billet hubs; rotors; 12-point wheel studs; 2-piston Wilwood forged calipers; brake pads; wheel bearings; seals; mounting hardware; instructions and drawing. Rotors with curved gas-relief slots are optionally available.
|
| SKU: |
8335 |
| Price: |
$595.00 |
|
|
|
|
|
|
LOWER DRAG A-ARM SILVER POWDER COATING (PAIR) |
|
 |
|
| Description: |
All Chassisworks chassis and frames now use our new, 3rd generation lower drag race A-arms. Constructed of the finest-quality material, these 1-piece designs are stronger and easier to install. They also feature easily replaceable polymer bushings in the pivots - which provides ease of movement and no lubrication is required. These lower A-arms are finished with silver powder coating. |
| SKU: |
6121 |
| Price: |
$299.00 |
|
|
|
|
|
|
MUSTANG II 74-78, PINTO 74-78 - STOCK-HEIGHT SPINDLE |
|
 |
|
| Description: |
STOCK SPINDLE 74-78 MUSTANG II, FOR BRAKES THAT ATTACH TO OEM STYLE MOUNT LOCATIONS, 1 PIECE FORGING CONSTRUCTION WITH INTEGRAL STEERING ARM. FITMENT NOTE USE WITH 74-78 MUSTANG II & 74-80 PINTO |
| SKU: |
5711-M30 |
| Price: |
$259.00 |
|
|
|
|
|
|
MUSTANG II TIE-ROD ADAPTERS (PAIR) |
|
 |
|
| Description: |
These adapters with hex adjusters weld to Mustang II or Pinto rack-and-pinion tie rods to lengthen or shorten the rack as necessary. |
| SKU: |
6106 |
| Price: |
$29.00 |
|
|
|
|
|
|
NEW PINTO RACK & PINION |
|
 |
|
| Description: |
Our top-quality version of the popular '71-72 Pinto rack and pinion is made from all new components and chrome-plated for a winning appearance. |
| SKU: |
6119 |
| Price: |
$229.00 |
|
|
|
|
|
|
TIE-ROD END,A-ARM,1/2" BORE |
|
 |
|
| Description: |
Spherical-bearing Mustang II tie-rod ends includes a pair of 1/2"-bore, female spherical rod ends with 1/2" bolt and misalignment spacers to attach a Pinto rack to a steering arm with 1/2" straight bore. Use with 6164 and 6165 fabricated spindles. |
| SKU: |
6107 |
| Price: |
$39.00 |
|
|
|
|
|
|
TIE-ROD ENDS, MUSTANG II TAPER, WITH 1/2" ROD END |
|
 |
|
| Description: |
Spherical-bearing Mustang II tie-rod ends includes a pair of 1/2"-bore, female spherical rod ends with a tapered stud with misalignment spacers that attach a Pinto rack to a 1974-80 Mustang II spindle. The tapered studs 1230 are also available individually. |
| SKU: |
6109 |
| Price: |
$49.00 |
|
|
|
|
|
|
TRAVEL LIMITER |
|
 |
|
| Description: |
Compatible with either strut or A-arm suspension, our limiter improves reaction time by restricting front-end travel. It provides a full 3" of travel adjustment. The adjuster attaches to your frame; the cable attaches to the lower A-arm. |
| SKU: |
6105 |
| Price: |
$39.00 |
|
|
|
|
|
|
UPPER DRAG A-ARM SILVER POWDER COATING (PAIR) |
|
 |
|
| Description: |
This exclusive Chassisworks design uses Teflon-lined rod ends to adjust camber and caster. It was engineered for use with Chassisworks screw-in balljoints (Number 6104). Your existing chassis can be easily upgraded to accept this improved suspension. Header clearance is greatly increased by our elimination of the upper crossbar found on conventional designs. Constructed of the highest quality material, these assemblies are sold in pairs and packaged complete with rod ends. A-arms are compatible with Chassisworks fabricated spindles and with Pinto/Mustang II spindles. These upper A-arms are finished with silver powder coating. |
| SKU: |
6120 |
| Price: |
$259.00 |
|
|
|
|
|
|
|
