 |
- Chassisworks
- Anti-Roll Bars
- Billet Accessories
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Front (Street Rod)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Suspension, Rear (Street Rod)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
- Total Control Products
- KP Components
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
A-Arm Suspension 4x2" Crossmember, Custom-Fit - Factory-Welded Crossmember ONLY |
 |
 |
|
| Description: |
Custom-Fit A-Arm Suspension Crossmember for use with Chassisworks A-arm suspension systems for 4x2" crossmembers and front clips. Product ships as a single factory-welded assembly. Features CNC-bent 4x2" tubular crossmember with factory-welded suspension and steering mounts. Select hub-to-hub widths of 51" to 65" (24" to 38" crossmember width) in one-inch increments.
NOTE: A-Arm suspension system must be purchased separately.
|
| SKU: |
78W943 |
| Price: |
$629.00 |
|
 |
|
|
|
|
A-Arm Suspension 4x2" Front Frame Clip ONLY, Custom-Fit - 4-1/2" Ground Clearance |
|
 |
|
| Description: |
Custom-Fit A-Arm Suspension Front Frame Clip (4.5" ground clearance) for use with Chassisworks A-arm suspension systems for 4x2" crossmembers and front clips. Product ships as a factory-welded crossmember assembly, featuring a CNC mandrel-bent 4x2" tubular crossmember with factory-welded suspension and steering mounts, and CNC mandrel-bent frame rails. Select hub-to-hub widths of 51" to 65" (24" to 38" crossmember width) in one-inch increments. Optional front frame horns.
NOTE: A-Arm suspension system must be purchased separately.
|
| SKU: |
78X943 |
| Price: |
$1,229.00 |
|
|
|
|
|
|
A-Arm Suspension 4x2" Front Frame Clip ONLY, Custom-Fit - 6" Ground Clearance |
|
 |
|
| Description: |
Custom-Fit A-Arm Suspension Front Frame Clip (6" ground clearance) for use with Chassisworks A-arm suspension systems for 4x2" crossmembers and front clips. Product ships as a factory-welded crossmember assembly, featuring a CNC mandrel-bent 4x2" tubular crossmember with factory-welded suspension and steering mounts, and CNC mandrel-bent frame rails. Select hub-to-hub widths of 51" to 65" (24" to 38" crossmember width) in one-inch increments. Optional front frame horns.
NOTE: A-Arm suspension system must be purchased separately.
|
| SKU: |
78Y943 |
| Price: |
$1,229.00 |
|
|
|
|
|
|
A-Arm Suspension System for Chassisworks 4x2" Crossmembers and Front Clips - (Drag Race) |
|
 |
|
| Description: |
A-Arm Drag Race Suspension and Steering System for Chassisworks 4x2" crossmembers and front clips, including 4x2" weld-in crossmember and front clips, and bolt-in front clips. Includes: bare steel or black powder coated control arms, balljoints with wrench, fabricated drag race spindle, satin or polished billet manual rack and pinion with heim-joint outer tie rods, single- or double-adjustable VariShock coil-overs with springs, shock simulator tools. Optional solid- or slotted-rotor drag race disc brake kit.
|
| SKU: |
780963 |
| Price: |
$2,995.00 |
|
|
|
|
|
|
|
|
BLACK UPPER A-ARMS, STAINLESS HARDWARE, (PAIR) |
|
 |
|
| Description: |
Our tubular A-arms are constructed out of .156"-wall tubing, with 7/8"-diameter arms. The STAINLESS billet, eyebolt-style adjuster in the upper A-arms greatly simplifies suspension alignment and cannot come loose like the slotted-style, OEM adjusters. Our billet bushing mounts are stronger and look better than the tubular bushing mounts used by all other manufacturers. The threaded balljoint housings have a profiled groove on their outside diameters to enhance the appearance, and feature dust-boot counter-bores to provide a better balljoint seal. The screw-in balljoints are sold in pairs with the dust boots, and must be purchased separately. Optional, polished-stainless balljoint covers screw onto the top of the balljoints and greatly improve their appearance (sold in pairs). Billet eyebolts, bushings and pivot pins are included. Chassisworks' exclusive STAINLESS billet pivot studs have taper-formed heads and provide the correct bushing preload; set-screw grooves assure they will not come loose. These A-arms are constructed out of mild steel and are black powder coated. |
| SKU: |
6181-SS |
| Price: |
$539.00 |
|
|
|
|
|
|
|
|
Control Arms (Lower) for Chassisworks 4x2" Crossmembers and Front Clips - Mild Steel, Bare |
|
 |
|
| Description: |
Our tubular A-arms are constructed out of .156"-wall tubing, with 1"-diameter lower arms. These one-piece-design lower A-arms don't require a strut rod. Our billet bushing mounts are stronger and look better than the tubular bushing mounts used by all other manufacturers. The lower-coil-over and antiroll-bar mounts attach to a cross tube, making the lower A-arm stronger and more flex-resistant. The threaded balljoint housings have a profiled groove on their outside diameters to enhance the appearance, and feature dust-boot counter-bores to provide a better balljoint seal. The screw-in balljoints are sold in pairs with the dust boots, and must be purchased separately. Optional, polished-stainless balljoint covers screw onto the top of the balljoints and greatly improve their appearance (sold in pairs). Billet eyebolts, bushings and pivot pins are included. Chassisworks' exclusive billet pivot studs have taper-formed heads and provide the correct bushing preload; set-screw grooves assure they will not come loose. These A-arms are unfinished plain mild steel. |
| SKU: |
6172 |
| Price: |
$549.00 |
|
|
|
|
|
|
Control Arms (Lower) for Chassisworks 4x2" Crossmembers and Front Clips - Mild Steel, Black |
|
 |
|
| Description: |
Our tubular A-arms are constructed out of .156"-wall tubing, with 1"-diameter lower arms. These one-piece-design lower A-arms don't require a strut rod. Our billet bushing mounts are stronger and look better than the tubular bushing mounts used by all other manufacturers. The lower-coil-over and antiroll-bar mounts attach to a cross tube, making the lower A-arm stronger and more flex-resistant. The threaded balljoint housings have a profiled groove on their outside diameters to enhance the appearance, and feature dust-boot counter-bores to provide a better balljoint seal. The screw-in balljoints are sold in pairs with the dust boots, and must be purchased separately. Optional, polished-stainless balljoint covers screw onto the top of the balljoints and greatly improve their appearance (sold in pairs). Billet eyebolts, bushings and pivot pins are included. Chassisworks' exclusive billet pivot studs have taper-formed heads and provide the correct bushing preload; set-screw grooves assure they will not come loose. These A-arms are constructed out of mild steel material and are black powder coated. |
| SKU: |
6182 |
| Price: |
$559.00 |
|
|
|
|
|
|
Control Arms (Upper) for Chassisworks 4x2" Crossmembers and Front Clips - Mild Steel, Bare |
|
 |
|
| Description: |
Our tubular A-arms are constructed out of .156"-wall tubing, with 7/8"-diameter arms. The billet, eyebolt-style adjuster in the upper A-arms greatly simplifies suspension alignment and cannot come loose like the slotted-style, OEM adjusters. Our billet bushing mounts are stronger and look better than the tubular bushing mounts used by all other manufacturers. The threaded balljoint housings have a profiled groove on their outside diameters to enhance the appearance, and feature dust-boot counter-bores to provide a better balljoint seal. The screw-in balljoints are sold in pairs with the dust boots, and must be purchased separately. Optional, polished-stainless balljoint covers screw onto the top of the balljoints and greatly improve their appearance (sold in pairs). Billet eyebolts, bushings and pivot pins are included. Chassisworks' exclusive billet pivot studs have taper-formed heads and provide the correct bushing preload; set-screw grooves assure they will not come loose. These A-arms are unfinished plain mild steel. |
| SKU: |
6171 |
| Price: |
$379.00 |
|
|
|
|
|
|
Control Arms (Upper) for Chassisworks 4x2" Crossmembers and Front Clips - Mild Steel, Black |
|
 |
|
| Description: |
Our tubular A-arms are constructed out of .156"-wall tubing, with 7/8"-diameter arms. The billet, eyebolt-style adjuster in the upper A-arms greatly simplifies suspension alignment and cannot come loose like the slotted-style, OEM adjusters. Our billet bushing mounts are stronger and look better than the tubular bushing mounts used by all other manufacturers. The threaded balljoint housings have a profiled groove on their outside diameters to enhance the appearance, and feature dust-boot counter-bores to provide a better balljoint seal. The screw-in balljoints are sold in pairs with the dust boots, and must be purchased separately. Optional, polished-stainless balljoint covers screw onto the top of the balljoints and greatly improve their appearance (sold in pairs). Billet eyebolts, bushings and pivot pins are included. Chassisworks' exclusive billet pivot studs have taper-formed heads and provide the correct bushing preload; set-screw grooves assure they will not come loose. These A-arms are constructed out of mild steel and are black powder coated. |
| SKU: |
6181 |
| Price: |
$389.00 |
|
|
|
|
|
|
Disc Brake Kit (Front), Drag Race Meduim Duty for Chassisworks Fabricated Spindle (6166) |
|
 |
|
| Description: |
This bolt-on brake kit fits our Chassisworks fabricated drag race spindles. The 11-3/4" diameter .350" thick solid (or optionally available slotted) rotor with curved gas-reliefs, combined with the 4-piston Wilwood caliper will supply adequate brakes for vehicles up to 2900 pounds. If used with a parachute weight can be as high as 3100 pounds. The billet aluminum hub is drilled for 5 on 4-1/2" and 5 on 4-3/4" bolt circles. Complete with 1/2x3" 12-point studs and screw-on dust covers. Kit includes anodized aluminum billet hubs; rotors; 12-point wheel studs; 4-piston Wilwood forged calipers; brake pads; wheel bearings; seals; mounting hardware; instructions and drawing. Rotors with curved gas-relief slots are optionally available. |
| SKU: |
8336 |
| Price: |
$689.00 |
|
|
|
|
|
|
Fabricated 4130 Spindles, Black - Fits Chassisworks 4x2" Crossmembers and Front Clips |
|
 |
|
| Description: |
Intended only for drag racing, our fabricated spindles are CNC-machined out of 4130 material and weigh less than six pounds. This is our direct replacement for street machine cast spindles, these new spindles have a black-powder-coat finish, 1/2"-20 thread in the steering arm, and feature relief-milled steering-arm and balljoint bosses to save weight. Use with our 8336 medium-duty and 8337 heavy-duty brake kits. |
| SKU: |
6166 |
| Price: |
$519.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Wrench for Screw-In Balljoints |
|
 |
|
| Description: |
This wrench is design to match the top drive flats for installing and tightening the screw-in balljoints. |
| SKU: |
6711 |
| Price: |
$35.00 |
|
|
|
|
|
|
 |
