 |
- Chassisworks
- Anti-Roll Bars
- Billet Accessories
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Front (Street Rod)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Suspension, Rear (Street Rod)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
- Total Control Products
- KP Components
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
Transmission Tunnel (Street Rod)
DRIVESHAFT LOOP, 1X2"; 10-1/2" INSIDE HEIGHT |
 |
 |
|
| Description: |
For cars using a 3x2" ladder bar or 4-link crossmember, this 1x2", box-tube driveshaft loop allows the use of a straight frame crossmember to increase ground clearance. This U-bend style can be used as a replacement for any driveshaft loop. It can be welded to the 2x3" dropped crossmember as the rear driveshaft loop and tunnel support. Use this loop in pairs to create a finished oval with a custom height. |
| SKU: |
6040 |
| Price: |
$39.00 |
|
 |
|
|
|
|
DRIVESHAFT OVAL, 1X2"; 11" INSIDE HEIGHT |
|
 |
|
| Description: |
For cars using a 3x2" ladder bar or 4-link crossmember, this 1x2", box-tube driveshaft loop allows the use of a straight frame crossmember to increase ground clearance. This 360-degree-oval, full loop has a 11" inside height for use by the rear U-joint with 7"-travel shocks. The inside height you need is determined by the required movement of the driveshaft in your chassis. |
| SKU: |
6039 |
| Price: |
$79.00 |
|
|
|
|
|
|
DRIVESHAFT OVAL, 1X2"; 6-1/2" INSIDE HEIGHT |
|
 |
|
| Description: |
The 1x2", box-tube driveshaft loop allows the use of a straight frame crossmember to increase ground clearance. This 360-degree-oval, full loop has a 6-1/2" inside height for use near the front U-joint. The inside height you need is determined by the required movement of the driveshaft in your chassis. |
| SKU: |
6037 |
| Price: |
$79.00 |
|
|
|
|
|
|
DRIVESHAFT OVAL, 1X2"; 9" INSIDE HEIGHT |
|
 |
|
| Description: |
For cars using a 3x2" ladder bar or 4-link crossmember, this 1x2", box-tube driveshaft loop allows the use of a straight frame crossmember to increase ground clearance. This 360-degree-oval, full loop has a 9" inside height for use by the rear U-joint with 5"-travel shocks. The inside height you need is determined by the required movement of the driveshaft in your chassis. |
| SKU: |
6038 |
| Price: |
$79.00 |
|
|
|
|
|
|
DRIVESHAFT TUNNEL, STEEL |
|
 |
|
| Description: |
This weld-in tunnel allows you to raise the driveshaft tunnel for more clearance when the car is lowered with a rear subframe installed. Because it's made of 18-gauge steel, this Chassisworks assembly is more durable than tunnels being sold throughout the industry. Your complete installation kit includes the preformed tunnel and instructions. Tunnel is 7" wide, 10" high, and 48" long. |
| SKU: |
6626 |
| Price: |
$79.00 |
|
|
|
|
|
|
FRAME EXHAUST PORT 4 1/2 DIAMETER X 2" LONG |
|
 |
|
| Description: |
Made out of 4-1/2” OD.250” wall mild steel tubing. These exhaust ports can welded into any crossmember. The 4” ID allows ample room to 3” diameter exhaust. Kit is one exhaust port. |
| SKU: |
1070 |
| Price: |
$25.00 |
|
|
|
|
|
|
 |
