 |
- Chassisworks
- Anti-Roll Bars
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
- Total Control Products
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
Drag Race 4-Link Frame Clips
Avenger 1-5/8" (4130)
|
|
4130 AVENGER FRAME,BRACKETS BEHIND HOOP, 3-1/2" |
 |
 |
|
| Description: |
Made out of 1-5/8 & 1-1/4"4130 tubing. Uses the same rear suspension as our Eliminator II chassis kits. All round tube construction makes it the perfect choice for the "fast street car" classes. The 4-link brackets mount 3-1/2" off the ground behind main hoop on the 4-link support tubes. For cars with the main hoop more than 23" forward of the rear axle center line. Kit includes a pair of frame rails; two 4-link support tubes; upper shock mount crossmember; upper shock mount tabs; rear crossmember; 1 1/4" frame gusset tubes; hardware; instructions and drawing. Shipped unassembled by UPS. Note: main hoop and cage rear struts are not included; they are part of the roll cage kit. |
| SKU: |
7134 |
| Price: |
$579.00 |
|
 |
|
|
|
|
4130 AVENGER FRAME,BRACKETS BEHIND HOOP, 5-1/2" |
|
 |
|
| Description: |
Made out of 1-5/8" & 1-1/4" 4130 tubing. Uses the same rear suspension as our Eliminator II chassis kits. All round tube construction make it the perfect choice for the "fast street car" classes. The 4-link brackets mount 5-1/2" off the ground behind main hoop on the 4-link support tubes. For cars with the main hoop more than 23" forward of the rear axle center line. Kit includes a pair of frame rails; two 4-link support tubes; upper shock mount crossmember; upper shock mount tabs; rear crossmember; 1 1/4" frame gusset tubes; hardware; instructions and drawing. Shipped unassembled by UPS. Note: main hoop and cage rear struts are not included; they are part of the roll cage kit. |
| SKU: |
7142 |
| Price: |
$609.00 |
|
|
|
|
|
|
4130 AVENGER FRAME,BRACKETS ON HOOP, 3-1/2" |
|
 |
|
| Description: |
Made out of 1-5/8 & 1-1/4"4130 tubing. Uses the same rear suspension as our Eliminator II chassis kits. All round tube construction makes it the perfect choice for the "fast street car" classes. The 4-link brackets mount 3-1/2" off the ground on the upper and lower main hoop crossmembers. For cars where the main hoop is placed within 23" of the rear axle center line. Kit includes a pair of frame rails; two 4-link crossmembers; upper shock mount crossmember; upper shock mount tabs; rear crossmember; 1 1/4" frame gusset tubes; hardware; instructions and drawing. Shipped unassembled by UPS. Note: main hoop and cage rear struts are not included; they are part of the roll cage kit. |
| SKU: |
7133 |
| Price: |
$469.00 |
|
|
|
|
|
|
4130 AVENGER FRAME,BRACKETS ON HOOP, 5-1/2" |
|
 |
|
| Description: |
Made out of 1-5/8" & 1-1/4" 4130 tubing. Uses the same rear suspension as our Eliminator II chassis kits. All round tube construction make it the perfect choice for the "fast street car" classes. The 4-link brackets mount 5-1/2" off the ground on the upper and lower main hoop crossmembers. For cars where the main hoop is placed within 23" of the rear axle center line. Kit includes a pair of frame rails; two 4-link crossmembers; upper shock mount crossmember; upper shock mount tabs; rear crossmember; 1 1/4" frame gusset tubes; hardware; instructions and drawing. Shipped unassembled by UPS. Note: main hoop and cage rear struts are not included; they are part of the roll cage kit. |
| SKU: |
7141 |
| Price: |
$479.00 |
|
|
|
|
|
|
DRAG-RACE ELIMINATOR II 4-LINK REAR SUSPENSION FOR REAR CHASSIS - COIL-OVER |
|
 |
|
| Description: |
CHASSIS-MOUNTED ELIMINATOR II 4-LINK COIL-OVER SUSPENSIN - CONTAINS: ELIMINATOR II DRAG RACE 4-LINK (USES HEIM ROD ENDS) FOR 3x2" OR 1-5/8" REAR FRAME RAIL CHASSIS, LOCATER, BILLET SHOCK MOUNTS AND ANTI-ROLL BAR. OPTIONS FOR: ROD ENDS, LOCATER, SHOCKS, SPRING RATE, AND WHEELIE BARS. |
| SKU: |
780223 |
| Price: |
$595.00 |
|
|
|
|
|
|
|
|
FAB9 M/S, EII 4LINK FOR SPHERICAL ROD ENDS |
|
 |
|
| Description: |
This welded FAB9™ mild steel rearend housing is available in lengths from 22" to 62-1/4" housing-end-to-housing-end in 1/4" increments. Pinion can be centered, 1/2" to passenger side or 1" to passenger side. You have a choice of 11 different housing combinations (see option list for details). The mild steel eliminator II 4-link brackets with 1/2" holes and 7/8" spacing between the brackets for the rod ends are welded at any outside-to-outside width from 16-1/2" to 42" in 1/2" increments. All welded housings will also include housing fill cap; magnetic drain plug with copper gasket; 12-point 3rd member studs; aircraft washers and locknuts. Tapered back braces (which add rigidity for high horse power applications) and housing vent are optionally available. A signed Custom Rearend Worksheet (which gives us all the information needed to build the housing) is required with all welded FAB9™ orders. You will find a link to the worksheet on the order page. |
| SKU: |
8261 |
| Price: |
$1,009.00 |
|
|
|
|
|
|
FAB9 4130 EII 4LINK FOR SPHERICAL ROD ENDS |
|
 |
|
| Description: |
This welded FAB9™ 4130 rearend housing is available in lengths from 22" to 62-1/4" housing-end-to-housing-end in 1/4" increments. Pinion can be centered, 1/2" to passenger side or 1" to passenger side. You have a choice of 11 different housing combinations (see option list for details). The 4130 chrome moly eliminator II 4-link brackets with 1/2" holes and 7/8" spacing between the brackets for the rod ends are welded at any outside-to-outside width from 16-1/2" to 42" in 1/2" increments. All welded housings will also include housing fill cap; magnetic drain plug with copper gasket; 12-point 3rd member studs; aircraft washers and locknuts. Tapered back braces (which add rigidity for high horse power applications) and housing vent are optionally available. A signed Custom Rearend Worksheet (which gives us all the information needed to build the housing) is required with all welded FAB9™ orders. You will find a link to the worksheet on the order page. |
| SKU: |
8262 |
| Price: |
$1,259.00 |
|
|
|
|
|
|
FAB9 3 1/4-4130,AVENGER 4LINK,SPHERICAL ROD ENDS |
|
 |
|
| Description: |
This welded FAB9™ 4130 rearend housing is available in lengths from 22" to 62-1/4" housing-end-to-housing-end in 1/4" increments. Pinion can be centered, 1/2" to passenger side or 1" to passenger side. You have a choice of 11 different housing combinations (see option list for details). The 4130 chrome moly avenger 4-link brackets with 1/2" holes and 7/8" spacing between the brackets for the rod ends are welded at any outside-to-outside width from 16-1/2" to 42" in 1/2" increments. All welded housings will also include housing fill cap; magnetic drain plug with copper gasket; 12-point 3rd member studs; aircraft washers and locknuts. Tapered back braces (which add rigidity for high horse power applications) and housing vent are optionally available. A signed Custom Rearend Worksheet (which gives us all the information needed to build the housing) is required with all welded FAB9™ orders. You will find a link to the worksheet on the order page. |
| SKU: |
8263 |
| Price: |
$1,989.00 |
|
|
|
|
|
|
WHEEL TUBS 28x43" ALUMINUM |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 28x43" tubs fit all tires over 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Top quality .032"-thick aluminum material is covered with PVC sheet (easily removed after installation) to protect the finish against scratching. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6608 |
| Price: |
$210.00 |
|
|
|
|
|
|
WHEEL TUBS 28x43" STEEL |
|
 |
|
| Description: |
Special packaging allows these tubs to be shipped via UPS! These 28x43" tubs are made of 22-gauge steel and fit tires over 33" tall. Tubs come with square beads, and feature Pittsburgh seams for easy assembly. Our exclusive contour tool and photo-illustrated instructions are provided. Tubs are shipped unassembled for low freight and ease of installation. Price is for one pair of tubs. |
| SKU: |
6614 |
| Price: |
$200.00 |
|
|
|
|
|
|
 |
