 |
- Chassisworks
- Anti-Roll Bars
- Body, Door, and Window (Race)
- Brake Kits
- Catalogs
- Chassis Hardware
- Chassis Kits (Drag Race)
- Chassis Stiffening, Braces, Connectors
- Closeout, Scratch & Ding Items
- Cooling System
- Driver Area Accessories (Race)
- Exhaust Systems, Components
- Frame Clips, Front Bolt-On
- Frame Clips, Front Weld-In
- Frame Clips, Rear Weld-In
- Frames, Weld-in
- Motor and Transmission Mounts
- Rearends, Housings, Axles
- Roll Bars, Roll Cages
- Shock Absorbers All Types
- Spindles, Uprights
- Springs
- Steering
- Suspension, Front (Drag Race)
- Suspension, Front (Pro Touring)
- Suspension, Rear (Drag Race)
- Suspension, Rear (Pro Street)
- Suspension, Rear (Pro Touring)
- Tin Kits - Sheet Metal
- Tools
- Trunk Area Accessories (Race)
- VariShock - Struts and Shocks
- Total Control Products
Email:
Phone:
- Tech - 916.388.0288
- Sales - 888.388.0297
Rack and Pinion - Manual
Chassisworks g-Machine Systems
A common issue with many custom steering and suspension conversions is achieving correct steering geometry using the limited selection of OEM and aftermarket rack and pinions. To solve this problem the g-Machine front-steer, manual rack and pinion can be sized from 15.5” to 29.5” (measured from inner tie-rod pivots), in one-inch increments, without affecting rack travel, steering effort, or reliability. This enables correct steering geometry for vehicles ranging from compacts to full-size pickups and allows the assembly to serve as a direct-replacement upgrade for 24.5” Mustang II racks.
- Front-steer manual rack and pinion
- Manufactured in 15 different lengths (15.5” - 29.5”, in one-inch increments)
- Direct bolt-on for g-Machine crossmember system
- Easily integrated into custom projects
- Direct replacement for stock Mustang II
- Rotatable within mounts to aid steering-shaft clearance
- Satin-aluminum or polished finish
- Large diameter 3/4"-36 pinion shaft
Billet Manual Rack and Pinion, Polished - SELECT WIDTH |
 |
 |
|
| Description: |
Sculpted from billet aluminum, our (-2) racks and mounts are supplied in
a polished finish. The center tube is polished stainless steel. Two
styles of mounts with stainless-steel hardware are available, for either
Chassisworks A-arm crossmembers or Mustang II-style crossmember mounts.
The rack can be rotated in its mount to align the input shaft with the
steering column. The rack tie-rod ends have male 9/16"-18 threads and
3/4"-36 spline input shafts. The racks are available in 15 different
inner-socket widths, allowing correct suspension geometry in very narrow
or very wide vehicles. Minimum inner-socket width is 15.5"; maximum is
29.5" (in 1-inch increments). The range is from nine inches shorter than
a Mustang II rack to five inches wider - making this component suitable
for virtually any manual-rack, front-steer application. |
| SKU: |
6175-02 |
| Price: |
$589.00 |
|
 |
|
|
|
|
Billet Manual Rack and Pinion, Satin - SELECT WIDTH |
|
 |
|
| Description: |
Sculpted from billet aluminum, our (-2) racks and mounts are supplied in
a polished finish. The center tube is polished stainless steel. Two
styles of mounts with stainless-steel hardware are available, for either
Chassisworks A-arm crossmembers or Mustang II-style crossmember mounts.
The rack can be rotated in its mount to align the input shaft with the
steering column. The rack tie-rod ends have male 9/16"-18 threads and
3/4"-36 spline input shafts. The racks are available in 15 different
inner-socket widths, allowing correct suspension geometry in very narrow
or very wide vehicles. Minimum inner-socket width is 15.5"; maximum is
29.5" (in 1-inch increments). The range is from nine inches shorter than
a Mustang II rack to five inches wider - making this component suitable
for virtually any manual-rack, front-steer application. |
| SKU: |
6175-01 |
| Price: |
$559.00 |
|
|
|
|
|
|
|
|
|
|
POLISHED BILLET RACK CLAMP FOR CHASSISWORKS MOUNT |
|
 |
|
| Description: |
Sculpted from billet aluminum, and supplied in a polished finish. Mounts with stainless-steel hardware are available for Chassisworks A-arm crossmembers. The rack can be rotated in its mount to align the input shaft with the steering column. |
| SKU: |
6176-2 |
| Price: |
$139.00 |
|
|
|
|
|
|
POLISHED BILLET RACK CLAMP,MUSTANG II FRAME MOUNT |
|
 |
|
| Description: |
Sculpted from billet aluminum, and supplied in a polished finish. Mounts with stainless-steel hardware are available for Mustang II-style crossmember mounts. The rack can be rotated in its mount to align the input shaft with the steering column. |
| SKU: |
6187-2 |
| Price: |
$199.00 |
|
|
|
|
|
|
SATIN BILLET RACK CLAMPS,MUSTANG II FRAME MOUNT |
|
 |
|
| Description: |
Sculpted from billet aluminum, and supplied in a satin finish. Mounts with stainless-steel hardware are available for Mustang II-style crossmember mounts. The rack can be rotated in its mount to align the input shaft with the steering column. |
| SKU: |
6187-1 |
| Price: |
$189.00 |
|
|
|
|
|
|
SATIN-FINISH BILLET RACK CLAMP,CHASSISWORKS MOUNT |
|
 |
|
| Description: |
Sculpted from billet aluminum, and supplied in a satin finish. Mounts with stainless-steel hardware are available for Chassisworks A-arm crossmembers. The rack can be rotated in its mount to align the input shaft with the steering column. |
| SKU: |
6176-1 |
| Price: |
$109.00 |
|
|
|
|
|
|
 |
